BCM20737S Data Sheet
Pin Map and Signal Descriptions
Section 2: Pin Map and Signal Descriptions
The BCM20737S pin map is shown in Figure 3.
Figure 3: BCM20737S (TOP View)
The signal name, type, and description of each pin in the BCM20737S is listed in Table 2 on page 10. The
symbols shown under I/O Type indicate pin directions (I/O = bidirectional, I = input, O = output) and the internal
pull-up/pull-down characteristics (PU = weak internal pull-up resistor and PD = weak internal pull-down resistor),
if any.
Broadcom®
BLE SiP Module
April 10, 2016 • 20737S-DS101-R
Page 9
BROADCOM CONFIDENTIAL