CBC915 EnerChip Energy Processor
EnerChip Energy Processor CBC915 Operating and Maximum Parameters
Parameter
Recommended Operating Conditions
Supply voltage VDD
Supply voltage VSS
Operating temperature - CBC915-ACA
Operating temperature - CBC915-AIA
Absolute Maximum Ratings
Voltage applied at VDD to VSS
Voltage applied to any pin
Diode current at any device terminal
Storage temperature range
-0.3
-0.3
-2
-55
-
-
-
-
4.1
VDD+0.3
-2
+105
V
V
mA
°C
2.5
-
-20
-40
3.5
0
+25
+25
3.6
-
+70
+85
V
V
°C
°C
Min
Typ
Max
Unit
Notes:
1. Thermal or electrical stresses beyond those listed under absolute maximum ratings may cause permanent damage
to the CBC915. These are stress ratings only, and functional operation of the device at these or any other conditions
beyond those indicated under recommended operating conditions is not implied. Exposure to absolute maximum rated
conditions for extended periods my affect device reliability.
EnerChip Energy Processor CBC915 I/O Pin Characterization
Parameter
Positive-going input threshold voltage
Negative-going input threshold
voltage
Input voltage hysteresis
Pullup/Pulldown resistor
Input Capacitance
High impedance leakage current
VOH - High level output voltage
VOL - Low level output voltage
Internal clock frequency tolerance
for pullup, VIN=VSS
for pulldown, VIN=VDD
VIN=VSS or VDD
See notes 1 and 2
100uA
100uA
25 °C
0 to 80 °C
3.5
3.5
3.5
N/A
Conditions
VDD
3.5
3.5
3.5
Min
1.59
0.88
0.36
20
-
-
Typ
-
-
-
35
5
-
Max
2.63
1.91
-
50
-
+/- 50
VDD-0.1
VSS+0.1
-
-
Unit
V
V
V
kΩ
pF
nA
V
V
MHz
VDD-0.25 -
VSS
-
-
-
+/- 1%
+/- 2.5%
Notes:
1. The leakage current is measured with VDD or VSS applied to the corresponding pin(s) unless otherwise noted.
2. The leakage of the I/O pins is measured individually. The I/O pin is selected for input and the pullup/pulldown resistor
is disabled. All inputs except STATUS SW/ and CALIBRATE/ are high impedance inputs.
DS-72-15 Rev C
©2010-2011 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com
Page 4 of 16