Panel Mount
DataSheet
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
IEC 61000-4-2 : Electrostatic Discharge – Level 3
IEC 61000-4-4 : Electrically Fast Transients – Level 3
IEC 61000-4-5 : Electrical Surges – Level 3
IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz
IEC 600068-2-27: Shock Resistance 15g/11ms
E116949 (except 90, 110 and 125A models)
10143 UG
LR81689 (except 12, 110 and 125A models)
ACCESORIES
Recommended Accessories
New Accessories!
Protective Cover & Hardware Kits
Cover
Hardware
Kit
Heat Sink
Part No.
Thermal Resistance Lug Terminal Thermal Pad
[ºC/W]
Protective Cover
Part number: KS101
Clear
plastic
cover
5.0
3.0
2.5
2.0
1.7
1.5
1.0
0.7
0.5
KS101
HK1
HK3
HK4
HS501DR
TRM1
TRM6
HSP-1
HSP-2
compatible with all new S1
designs. Safety covers
provide added protection
from electric shock when
installing or checking
equipment.
HS301 / HS301DR
HS251
HS201 / HS201DR
HS172
HS151 / HS151DR
HS103 / HS103DR
HS072
Hardware Kit
Part number: HK3
Bag with
standoffs, 2 screws 8-32 x
1/4, and lockwashers
2
threaded
HS053
2
M8 for output, and
threaded standoffs,
2
2
screws 6-32 x 3/16, and 2
lockwashers M6 for input.
Standoff screws provide additional mounting options
such as "dead bug" mounting, using lug terminals or
wire terminals to the side of the relay.
Hardware Kit
Part number: HK4
Bag with 2 square brass
accessories and 2 screw
8-32 x 5/8 for output. Used
to mount TMR1 lug
terminals.
Rev. 081913
Do not forget to visit us at: www.crydom.com
Copyright © 2013 Crydom Inc. Specifications subject to change without notice.
CRYDOM [ CRYDOM INC., ]
