Maximum Ratings at TA = 25°CNotes 1,3, & 4
DCꢀForwardꢀCurrent
CxxxDA3547-Sxxx00
150ꢀmA
PeakꢀForwardꢀCurrentꢀ(1/10ꢀdutyꢀcycleꢀ@ꢀ1ꢀkHz)
LEDꢀJunctionꢀTemperature
200ꢀmA
150°C
ReverseꢀVoltage
5ꢀV
OperatingꢀTemperatureꢀRange
-40°Cꢀtoꢀ+100°C
-40°Cꢀtoꢀ+100°C
1000ꢀV
StorageꢀTemperatureꢀRange
ElectrostaticꢀDischargeꢀThresholdꢀ(HBM)ꢀNoteꢀ2
ElectrostaticꢀDischargeꢀClassificationꢀ(MIL-STD-883E)ꢀNoteꢀ2
Classꢀ2
Note 3
Typical Electrical/Optical Characteristics at TA = 25°C, If = 50 mA
Reverse Current
[I(Vr=5V), μA]
Full Width Half Max
Part Number
Forward Voltage (Vf, V)
(λD, nm)
Min.
Typ.
3.1
Max.
Max.
Typ.
20
C450DA3547-Sxxx00
C460DA3547-Sxxx00
2.8
2.8
3.4
3.4
2
2
3.1
21
Mechanical Specifications
Description
CxxxDA3547-Sxxx00
Dimension
Tolerance
±35
P-NꢀJunctionꢀAreaꢀ(μm)
296ꢀxꢀ416
350ꢀxꢀ470
200ꢀxꢀ320
155
ChipꢀBottomꢀAreaꢀ(μm)
±35
ChipꢀTopꢀAreaꢀ(μm)
±35
ChipꢀThicknessꢀ(μm)
±15
AuSnꢀBondꢀPadꢀWidthꢀ–ꢀAnodeꢀ(um)
AuSnꢀBondꢀPadꢀLengthꢀ–ꢀAnodeꢀ(um)
AuSnꢀBondꢀPadꢀWidthꢀ–ꢀCathodeꢀ(um)
AuSnꢀBondꢀPadꢀLengthꢀ–ꢀCathodeꢀ(um)
BondꢀPadꢀGapꢀ(μm)
90
±15
296
±35
236
±35
296
±35
90
±15
AuSnꢀBondꢀPadꢀThicknessꢀ(μm)
3
±0.5
Notes:
1.ꢀ Maximumꢀratingsꢀareꢀpackage-dependent.ꢀTheꢀaboveꢀratingsꢀwereꢀdeterminedꢀusingꢀaꢀchipꢀsub-mountꢀonꢀMCPCBꢀ(withꢀsiliconeꢀencapsulationꢀandꢀ
intrinsicꢀAuSnꢀmetalꢀdieꢀattach)ꢀforꢀcharacterization.ꢀRatingsꢀforꢀotherꢀpackagesꢀmayꢀdiffer.ꢀJunctionꢀtemperatureꢀshouldꢀbeꢀcharacterizedꢀinꢀaꢀspecificꢀ
packageꢀtoꢀdetermineꢀlimitations.ꢀAssemblyꢀprocessingꢀtemperatureꢀmustꢀnotꢀexceedꢀ325°Cꢀ(<ꢀ5ꢀseconds).
2.ꢀ Productꢀresistanceꢀtoꢀelectrostaticꢀdischargeꢀ(ESD)ꢀaccordingꢀtoꢀtheꢀHBMꢀisꢀmeasuredꢀbyꢀsimulatingꢀESDꢀusingꢀaꢀrapidꢀavalancheꢀenergyꢀtestꢀ(RAET).ꢀ
TheꢀRAETꢀproceduresꢀareꢀdesignedꢀtoꢀapproximateꢀtheꢀmaximumꢀESDꢀratingsꢀshown.
3.ꢀ Allꢀproductsꢀconformꢀtoꢀtheꢀlistedꢀminimumꢀandꢀmaximumꢀspecificationsꢀforꢀelectricalꢀandꢀopticalꢀcharacteristicsꢀwhenꢀassembledꢀandꢀoperatedꢀ
atꢀ50ꢀmAꢀwithinꢀtheꢀmaximumꢀratingsꢀshownꢀabove.ꢀEfficiencyꢀdecreasesꢀatꢀhigherꢀcurrents.ꢀTypicalꢀvaluesꢀgivenꢀareꢀwithinꢀtheꢀrangeꢀofꢀaverageꢀ
valuesꢀexpectedꢀbyꢀmanufacturerꢀinꢀlargeꢀquantitiesꢀandꢀareꢀprovidedꢀforꢀinformationꢀonly.ꢀAllꢀmeasurementsꢀwereꢀmadeꢀusingꢀlampsꢀinꢀT-1ꢀ3/4ꢀ
packagesꢀ(withꢀHysolꢀOS4000ꢀepoxyꢀencapsulantꢀandꢀintrinsicꢀAuSnꢀmetalꢀdieꢀattach).ꢀOpticalꢀcharacteristicsꢀmeasuredꢀinꢀanꢀintegratingꢀsphereꢀ
usingꢀIlluminanceꢀE.
4.ꢀ TheꢀmaximumꢀforwardꢀcurrentꢀisꢀdeterminedꢀbyꢀtheꢀthermalꢀresistanceꢀbetweenꢀtheꢀLEDꢀjunctionꢀandꢀambient.ꢀItꢀisꢀcrucialꢀforꢀtheꢀend-productꢀtoꢀbeꢀ
designedꢀinꢀaꢀmannerꢀthatꢀminimizesꢀtheꢀthermalꢀresistanceꢀfromꢀtheꢀLEDꢀjunctionꢀtoꢀambientꢀinꢀorderꢀtoꢀoptimizeꢀproductꢀperformance.
160
140
120
100
80
Rth j-a = 10 C/W
Rth j-a = 20 C/W
60
Rth j-a = 30 C/W
Rth j-a = 40 C/W
40
20
0
50
75
100
125
150
175
Ambient Temperature (C)
Cree,ꢀInc.
4600ꢀSiliconꢀDrive
Durham,ꢀNCꢀ27703
USAꢀTel:ꢀ+1.919.313.5300
www.cree.com
Copyrightꢀ©ꢀ2010ꢀCree,ꢀInc.ꢀAllꢀrightsꢀreserved.ꢀTheꢀinformationꢀinꢀthisꢀdocumentꢀisꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.ꢀCreeꢀandꢀtheꢀ
Creeꢀlogoꢀareꢀregisteredꢀtrademarks,ꢀandꢀDAꢀandꢀDA3547ꢀareꢀtrademarksꢀofꢀCree,ꢀInc.ꢀ
2
CPR3EL Rev. A