Crane Aerospace & Electronics Power Solutions
MHV Single, Dual and Triple DC/DC Converter Cases
28 VOLT INPUT – 15 WATT
CASE H2
BOTTOM VIEW
Bathtub
Squared corner and dot on top
of case indicate pin one.
1.110 max. (28.19)
0.955 (24.26)
0.040 dia
(1.02)
1
2
3
4
5
Seam Seal
10
0.155 (3.94)
0.000
9
8
7
6
0.400 max.
(10.16)
Seal hole: 0.092 ±0.002 (2.34 ±0.05)
Squared corner and dot on top
of case indicate pin one.
1.110 (28.19)
0.955 (24.26)
1
2
3
4
5
10
0.155 (3.94)
0.000
9
8
7
6
0.000
0.245 (6.22)
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage the device.
Solder pins individually with heat application not exceeding 300°C for 10 seconds per pin.
Materials
Header
Cold Rolled Steel/Nickel/Gold
Cover
Kovar/Nickel
Pins
#52 alloy/Gold compression glass seal
Case H2, Rev C - 20060109
Please refer to the numerical dimensions for accuracy. All information is believed to be accurate,
but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make
changes in products or specifications without notice.
Copyright © 1999-2006 Interpoint Corp. All rights reserved.
F
IGURE
8: C
ASE
H2 - MHV T
RIPLE
www.craneae.com
Page 10 of 14
Rev D - 20060710
2.090 max. (53.01)
0.645 (16.38)
1.045 (26.54)
1.445 (36.70)
1.845 (46.86)
2.090 max. (53.01)
0.000
0.000
0.245 (6.22)
0.645 (16.38)
1.045 (26.54)
1.445 (36.70)
1.845 (46.86)
0.25 (6.4)