CASE L
CASES
0.060 min
(1.52)
CASE L
TOP VIEW
Cover Placement
and
Min/Max Dimensions
See Figure 50
for pin configuration
3.20 max (81.3)
0.060 min
(1.52)
2.46 max (62.5)
0.337 min
(8.56)
0.337 min
(8.56)
Squared corner indicates pin one
Materials
Header Cold Rolled Steel/Nickel/Tin
Cover Cold Rolled Steel/Nickel/Tin
Pins
#52 alloy pins 1-4, and 9-10
#52 alloy with copper core pins 5-8
ceramic seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.2) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
FIGURE 49: CASE L MAXIMUM DIMENSIONS
B8-31
CRANE [ Crane Aerospace & Electronics. ]
