KAQY412 Series
4PIN 60V N.C. TYPE
SOLID STATE RELAY-MOSFET OUTPUT
cosmo
Recommended Soldering Conditions
(a) Infrared reflow soldering：
Peak reflow soldering：
Time of peak reflow temperature:
Time of temperature higher than 230℃：
Time to preheat temperature from
180~190℃：
260℃ or below (package surface temperature)
10 sec
30-60 sec
60-120 sec
Two
Number of reflows：
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2
Wt% is recommended.)
Flux：
Recommended Temperature Profile of Infrared Reflow
10 sec M ax.
260℃
230℃
190℃
180℃
30-60 sec
60-120 sec
t (s)
(b) Wave soldering：
Temperature：
Time：
260℃ or below (molten solder temperature)
10 seconds or less
120℃ or below (package surface temperature)
One
Preheating conditions:
Number of times：
Flux：
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(c) Cautions：
Fluxes：
Avoid removing the residual flux with freon-based and
chlorine-based cleaning solvent.
Avoid shorting between portion of frame and leads.
Cosmo Electronics Corp.
Document No. 69M01001.5
http://www.cosmo-ic.com
- 8 -
COSMO [ COSMO ELECTRONICS CORPORATION ]
