KAQW216 Series
8PIN 600V N.O. TYPE
SOLID STATE RELAY-MOSFET OUTPUT
cosmo
Recommended Soldering Conditions
(a) Infrared reflow soldering:
Peak reflow soldering:
Time of peak reflow temperature:
Time of temperature higher than 230℃:
Time to preheat temperature from
180~190℃:
260℃ or below (package surface temperature)
10 sec
30-60 sec
60-120 sec
Two
Number of reflows:
Rosin flux containing small amount of chlorine (The
flux with a maximum chlorine content of 0.2 Wt% is
recommended.)
Flux:
Recommended Temperature Profile of Infrared Reflow
10 sec M ax.
260℃
230℃
190℃
180℃
30-60 sec
60-120 sec
t (s)
(b) Wave soldering:
Temperature:
Time:
260℃ or below (molten solder temperature)
10 seconds or less
120℃ or below (package surface temperature)
One
Preheating conditions:
Number of times:
Flux:
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(c) Cautions:
Fluxes:
Avoid removing the residual flux with freon-based and chlorine-based
cleaning solvent.
Avoid shorting between portion of frame and leads.
Cosmo Electronics Corp.
Document No. 69M20006.3
http://www.cosmo-ic.com
- 8 -