Series PDBFS Enclosed Power Distribution Blocks
Panel Mounting
Capable on all part numbers
Use 2 screws for mounting
each pole (#10 or M5 screw)
(4 screws for PDBFS504)
OR
Hook load side onto
35mm DIN RAIL
Open the latch using
screwdriver
Close the latch
DIN Rail Mounting
PDBFS204, PDBFS220, PDBFS303,
PDBFS377, and PDBFS500 only.
Rotate PDB down
DIN Rail anchors are required on each
side of block or blocks.
Anchors must be used to prevent
damage to the plastic housing when
tightening terminals.
For interlocking two or more blocks on a DIN
Rail, insert male dove tail part number 2A1279
into the female dove tail opening.
Fully insert male dove tail to
interlock blocks.
2A1279 accessory ordered separately.
07-05-07
BU-SB07255
Form No. PDB
Page 6 of 23
Data Sheet #1049
COOPER [ COOPER BUSSMANN, INC. ]
