THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS
Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 20 cycles,10 minute dwell, 1m inute
transition.
SOLDERING
Pad Solderability: Per MIL-STD-883, Method 200. 8 hour steam age prior to 254°C ±5°C Solder pot dip, 95% Coverage.
Solder Reflow: The component solder internal to this device has a melt ing point of 221°C, the peak temperature inside the
device should be less than or equal to 220°C for a maximum of 10 seconds.
MECHANICAL CHARACTERISTICS
Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15mi nute cycles 12 times each
perpendicular axis.
Shock: Per MIL-STD-202, Method 213, Condition D. 500G’s, 1ms, half sine, 3 shocks per direction.
Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C.
PIN FUNCTION
.330 max
(8.382mm)
CW
DATE CODE
ASOV5S3
12.80M
1
7
8
14
CONTROL VOLTAGE
GROUND (CASE)
OUTPUT
Vcc
Dimensional Tolerance:
±.005 (.127mm)
KEEP OUT AREA
90%
.830
(21.08mm)
50%
10%
.565
(14.35mm)
CONTROL
VOLTAGE
4.1Vdc
POWER
SUPPLY
5.0Vdc
14
8
1
7
Specifications subject to change without notice.
DATA SHEET #:
Cx016
PAGE
2
OF
2
REV:
04
DATE:
6/24/03
a
Copyright 2001 Connor-Winfield all rights reserved.