THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
5.0V SURFACE MOUNT 5x3.2mm
CRYSTAL CLOCK OSCILLATOR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature
Supply Voltage
UNITS
(Vcc)
MINIMUM
-55
-0.5
NOMINAL
-
-
MAXIMUM
125
7.0
UNITS
°C
Vdc
TABLE 2.0
(Fo)
1.8
-25
(Fo)
1.8
-50
(Fo)
1.8
-100
-
-
-
-
-
-
50
25
50
50
50
100
MHz
ppm
MHz
ppm
MHz
ppm
1
TABLE 3.0
MINIMUM
0
(Vdd)
(Icc)
4.5
-
NOMINAL
-
5.0
-
MAXIMUM
70
5.5
45
UNITS
°C
Vdc
mA
TABLE 4.0
(Vih)
(Vil)
2.2
-
-
-
-
-
-
-
-
0.8
100
100
Vdc
Vdc
nS
nS
2
NOTE
1
1
TABLE 1.0
NOTE
7115, 7125,
7135
DESCRIPTION
MODEL SPECIFICATIONS:
MODEL 7115
Frequency Range
Frequency Tolerance:
MODEL 7125
Frequency Range
Frequency Tolerance:
MODEL 7135
Frequency Range
Frequency Tolerance:
OPERATING SPECIFICATIONS
PARAMETER
Operating Temperature Range
Supply Voltage
Supply Current
The Connor-Winfield models 7115,
7125 and 7135 are 5.0V HCMOS,
Surface Mount, Fixed Frequency
Crystal Oscillators (XO) designed
for use in all applications requiring
precision clocks. The surface
mount package is designed for
high-density mounting and is
optimum for mass production.
INPUT CHARACTERISTICS
Enable Voltage
Disable Voltage
Enable Time
Disable Time
FEATURES
18 to 50 Mhz
5.0V OPERATION
TRI-STATE ENABLE / DISABLE FUNCTION
OVERALL FREQUENCY TOLERANCE:
7115 ±25ppm
7125 ±50ppm
7135 ±100ppm
TEMPERATURE RANGE: 0 to 70°C
CERAMIC SURFACE MOUNT PACKAGE
HCMOS OUTPUT
CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
Current
(High)
(Low)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start-Up Time
Jitter
MINIMUM
-
4.50
-
-16
-
40
-
-
-
NOMINAL
-
-
-
MAXIMUM
50
-
0.55
-
16
60
5
10
5
UNITS
pF
Vdc
Vdc
mA
mA
%
nS
mS
pS RMS
TABLE 5.0
NOTE
(Voh)
(Vol)
(Ioh)
(Ioh)
-
-
50
-
-
-
PACKAGE CHARACTERISTICS
Package
Hermetically sealed ceramic package and metal c over
TABLE 6.0
TAPE AND REEL PACKAGING
Note:
1) Inclusive of calibration @ 25
°C
, frequency vs. temperature stability, supply voltage change, load
change, shock and vibration, 10 years aging.
2) Oscillator output is enabled with no connection on pad 1
0.134 MAX
(3.40mm)
ORDERING INFORMATION
0.060
(1.50mm)
0.042 MAX.
(1.07mm)
0.100
(2.54mm
)
0.205 MAX.
(5.21mm)
0.040
(1.02mm)
0.025
(0.64mm)
0.037
(0.95mm)
PAD CONNECTION
1
ENABLE/DISABLE
2
GROUND
3
OUTPUT
4
Vcc
Dimensional Tolerance: ±.02” (.508mm)
±.005” (.127mm)
7115 A5
20MHZ
7115
CLOCK
SERIES
CW 0107
7115
20.00M
-
20.00 MHz
CENTER
FREQUENCY
Specifications subject to change without notice.
REV:
01
DATE:
01/05/05
DATA SHEET #:
Sm088
PAGE
1
OF
2
a
Copyright 2001 Connor-Winfield all rights reserved.
CONNOR-WINFIELD [ CONNOR-WINFIELD CORPORATION ]
