AdvancedTCA Connectors
Technical Data
Materials
Precision machined contacts
Stamped contacts
Insulator
Contacts
Materials
Plating
Glass filled plastic, UL 94V-0
Copper alloy
Gold flash over nickel
0.8 µm gold over nickel
(press fit design tin plated)
Gold flash over nickel
0.8 µm gold over nickel gold over nickel
(press fit design tin plated)
Electrical Characteristics
Max. current rating, per UL 1977,
(see temperature rise curve for details)
Size 16 power contacts
30 A continuous all contacts under load
Size 22 signal contacts
2 A nominal rating
Initial contact resistance
(termination to termination)
Size 16 power contacts
0.0022 Ω max.
Size 22 signal contacts
0.0085 Ω max.
0.02 Ω max.
Insulation resistant
5 G Ω per IEC 512-2 Test 3a
Voltage proof
Contacts 1 through 16
Contacts 17 through 34
1000 V r.m.s.
2000 V r.m.s.
Creepage and clearance distance (minimum)
Contact positions 1 through 16 to any
other contact within this group
Contact positions 17 through 24 to any
other contact within this group
Contact positions 25 through 34 to any
other contact within this group
Contact positions 13 through 16 to 17 through 20
Contact positions 21 through 24 to 25, 26
Contact positions 25, 26 to 27 through 29
Working voltage
0.7 mm
2.5 mm
1.4 mm
3.0 mm
4.0 mm
2.0 mm
100 V r.m.s.
Mechanical Characteristics
Blind mating system
Polarization
male and female connector bodies provide “lead-in“ for 2.0 mm diametral misalignment
provided by connector body design
Resistance to solder heat
260°C for 10 seconds duration per IEC 512-6, Test 12e
25-watt soldering iron
(for other application contact factory)
Sequential contact mating system (succession)
1.
2.
3.
25, 26, 28, 29, 30 and 31
33
34
4. contacts 1 to 24 mate before 27 and 32 (last mate)
Mechanical operations
Temperature range
250 cycles
-55°C to +125°C
Technical alterations are subjects to change without notice.
|
1 2
CONEC [ CONEC ELEKTRONISCHE BAUELEMENTE GMBH ]
