FX614 参数 Datasheet PDF下载

Bell 202 Compatible Modem

FX614

1.4

External Components

R1

X1

100k

Ω

3.579545MHz

C1, C2

C3

C4

18pF

0.1

µ

F

0.1

µ

F

Resistors

±

5%, capacitors

±

10% unless otherwise stated.

Figure 2 Recommended External Components for Typical Application

1.5

1.5.1

General Description

Xtal Osc and Clock Dividers

Frequency and timing accuracy of the FX614 is determined by a 3.579545MHz clock present at the

XTAL/CLOCK pin. This may be generated by the on-chip oscillator inverter using the external components C1,

C2 and X1 of Figure 2, or may be supplied from an external source to the XTAL/CLOCK input. If supplied from

an external source, C1, C2 and X1 should not be fitted.

The on-chip oscillator is turned off in the 'Zero-Power' mode.

If the clock is provided by an external source which is not always running, then the 'Zero-Power' mode must be

set when the clock is not available. Failure to observe this rule may cause a significant rise in the supply

current drawn by FX614 as well as generating undefined states of the RXD, DET and RDYN outputs.

©

1997 Consumer Microcircuits Limited

5

D/614/4