Calling Line Identifier
FX602
Packages
D4 / P3
Pin No.
12
Name
IRQN
Signal
Description
Type
O/P
An open-drain active low output that may be
used as an Interrupt Request / Wake-up input to
the associated µC. An external pull-up resistor
should be connected between this output and
V
DD
.
A logic level output driven by the Ring or Line
Polarity Reversal Detector, the Tone Alert
Detector or the FSK Level detect circuits,
depending on the operating mode. See section
1.5.1.
A logic level input which may be used to clock
received data bits out of the FSK Data Retiming
block.
A logic level output carrying either the raw output
of the FSK Demodulator or re-timed 8-bit
characters depending on the state of the RXCK
input. See section 1.5.6
The positive supply rail. Levels and thresholds
within the device are proportional to this voltage.
Should be decoupled to VSS by a capacitor
mounted close to the device pins.
13
DET
O/P
14
RXCK
I/P
15
RXD
O/P
16
V
DD
Power
Notes:
I/P
I/P (S)
O/P
BI
=
=
=
=
Input
Schmitt trigger input
Output
Bidirectional
©
1998 Consumer Microcircuits Limited
5
D/602/7
CMLMICRO [ CML MICROCIRCUITS ]
