欢迎访问ic37.com |
会员登录 免费注册
发布采购

CMX469A 参数 Datasheet PDF下载

CMX469A图片预览
型号: CMX469A
PDF下载: 下载PDF文件 查看货源
内容描述: 1200/2400/4800波特FFSK / MSK调制解调器 [1200/2400/4800 Baud FFSK/MSK Modem]
分类和应用: 调制解调器
文件页数/大小: 17 页 / 546 K
品牌: CMLMICRO [ CML MICROCIRCUITS ]
 浏览型号CMX469A的Datasheet PDF文件第2页浏览型号CMX469A的Datasheet PDF文件第3页浏览型号CMX469A的Datasheet PDF文件第4页浏览型号CMX469A的Datasheet PDF文件第5页浏览型号CMX469A的Datasheet PDF文件第6页浏览型号CMX469A的Datasheet PDF文件第7页浏览型号CMX469A的Datasheet PDF文件第8页浏览型号CMX469A的Datasheet PDF文件第9页  
CMX469A
1200/2400/4800 Baud
FFSK/MSK Modem
D/469A/2
May 2001
Provisional Issue
Features
Full-Duplex FFSK/MSK Modem with
Separate Rx and Tx Enable Functions
Pin Selectable Data Rates:
1200, 2400 or 4800 Baud
Pin Selectable Xtal/Clock Inputs:
1.008MHz or 4.032MHz
Clock Recovery Facility
Carrier Detect Facility
Low Power Operation (2.0mA typ. at 3.0V)
Applications
Data-Over Radio
Personal/Cordless Telephone
Radio and General Applications
Narrowband Coax Data Channels
Two Way Radio (MPT1327) Signalling
Portable Data Terminals
1.1
Brief Description
The CMX469A is a single-chip CMOS LSI circuit which operates as a full-duplex 1200, 2400 or
4800 baud FFSK/MSK modem. The mark and space frequencies are 1200/1800, 1200/2400 and
2400/4800 Hz respectively. Tone frequencies are phase continuous; transitions occur at the zero
crossing point. A common Xtal oscillator with a choice of two clock frequencies (1.008MHz or
4.032MHz) provides baud-rate, transmit frequencies, and Rx and Tx synchronization.
The transmitter and receiver operate entirely independently, including the individual section
powersave functions. The CMX469A includes on-chip circuitry for Carrier Detect and Rx Clock
recovery, both of which are made available as output pins. Rx, Tx and Carrier Detect paths
contain bandpass filters to optimise signal conditions in each section of the modem. The
CMX469A demonstrates good sensitivity and bit-error-rate under adverse signal conditions. The
Carrier Detect time constant is set by an external capacitor, so that the product's performance
can be optimised in high noise environments. This low-power device operates from a single
supply
between 2.7V and 5.5V, requires few external components and is available in a wide
variety of plastic packages.
©
2001 Consumer Microcircuits Limited