IXD_604
5.4.5 D2 (8-Pin DFN)
5.00 BSC
(0.197 BSC)
0.35 x 45º
(0.014 x 45º)
0.80 / 1.00
(0.031 / 0.039)
0.20 REF
(0.008 REF)
0.95
(0.037)
4.50
(0.177)
Pin 1
4.00 BSC
(0.158 BSC)
3.05
(0.120)
0.45
(0.018)
0.00 / 0.05
(0.000 / 0.002)
2.55
(0.100)
1.20
(0.047)
0.76 / 0.81
(0.030 / 0.032)
Recommended PCB Land Pattern
3.04 / 3.09
(0.120 / 0.122)
Dimensions
mm MIN / mm MAX
(inches MIN / inches MAX)
0.30 / 0.45
(0.012 / 0.018)
0.95 BSC
(0.037 BSC)
Pin 1
Pin 8
2.54 / 2.59
(0.100 / 0.102)
NOTE:
0.35 / 0.45 x 45º
(0.014 / 0.018 x 45º)
The exposed metal pad on the back of the D2 package may be
left floating or connected to ground. It is not suitable for carrying current.
5.4.6 Tape & Reel Information for D2 Package
∅1.55 0.05
330.2 DIA.
(13.00 DIA.)
4.00 0.10 See Note #2
1.75 0.10
R0.75 TYP
2.00 0.05
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
(0.05)
5º MAX
5.50 0.05
(0.05)
B0=5.40 0.10
12.00 0.30
Embossed Carrier
K0=1.90 0.10
∅1.50 (MIN)
8.00 0.10
NOTES:
5º MAX
1. A0 & B0 measured at 0.3mm above base of pocket.
2. 10 pitches cumulative tol. 0.2mm
3. ( ) Reference dimensions only.
A0=4.25 0.10
Embossment
4. Unless otherwise specified, all dimensions in millimeters.
0.30 0.05
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale,
Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for
a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-IXD_604-R02
©Copyright 2010, Clare, Inc.
All rights reserved. Printed in USA.
12/3/2010
R02
www.clare.com
13
CLARE [ CLARE ]
