CS2300-CP
Fractional-N Clock Multiplier with Internal LCO
Features
Clock Multiplier / Jitter Reduction
General Description
The CS2300-CP is an extremely versatile system
clocking device that utilizes a programmable phase
lock loop. The CS2300-CP is based on a hybrid ana-
log-digital PLL architecture comprised of a unique
combination of a Delta-Sigma Fractional-N Frequency
Synthesizer and a Digital PLL. This architecture allows
for generation of a low-jitter clock relative to an exter-
nal noisy synchronization clock at frequencies as low
as 50 Hz. The CS2300-CP supports both I²C and SPI
for full software control.
The CS2300-CP is available in a 10-pin MSOP pack-
age in Commercial (-10°C to +70°C) grade. Customer
development kits are also available for device evalua-
tion. Please see
for
complete details.
–
Generates a Low Jitter 6 - 75 MHz Clock
from a Jittery or Intermittent 50 Hz to 30
MHz Clock Source
Internal LC Oscillator for Timing Reference
Highly Accurate PLL Multiplication Factor
–
Maximum Error less than 1 PPM in High-
Resolution Mode
I²C™ / SPI™ Control Port
Configurable Auxiliary Output
Minimal Board Space Required
–
No External Analog Loop-filter
Components
3.3 V
Frequency Reference
I²C/SPI
Software Control
I²C / SPI
PLL Output
Lock Indicator
Auxiliary
Output
LCO
Fractional-N
Frequency Synthesizer
6 to 75 MHz
PLL Output
N
50 Hz to 30 MHz
Frequency
Reference
Output to Input
Clock Ratio
Digital PLL & Fractional
N Logic
Copyright
Cirrus Logic, Inc. 2009
(All Rights Reserved)
AUG '09
DS843F1
CIRRUS [ CIRRUS LOGIC ]
