CS2200-OTP
3. CHARACTERISTICS AND SPECIFICATIONS
RECOMMENDED OPERATING CONDITIONS
GND = 0 V; all voltages with respect to ground. (Note 1)
Parameters
Symbol
Min
Typ
Max
Units
DC Power Supply
VD
3.1
3.3
3.5
V
Ambient Operating Temperature (Power Applied)
Commercial Grade
Automotive-D Grade
Automotive-E Grade
TAC
TAD
TAE
-10
-40
-40
-
-
-
+70
+85
+105
°C
°C
°C
Notes: 1. Device functionality is not guaranteed or implied outside of these limits. Operation outside of these limits
may adversely affect device reliability.
ABSOLUTE MAXIMUM RATINGS
GND = 0 V; all voltages with respect to ground.
Parameters
Symbol
VD
Min
-0.3
-
Max
6.0
Units
V
DC Power Supply
Input Current
IIN
±10
mA
V
Digital Input Voltage (Note 2)
VIN
-0.3
-55
-65
VD + 0.4
125
Ambient Operating Temperature (Power Applied)
Storage Temperature
TA
°C
Tstg
150
°C
CAUTION: Stresses beyond “Absolute Maximum Ratings” levels may cause permanent damage to the device.
These levels are stress ratings only, and functional operation of the device at these or any other condi-
tions beyond those indicated in Section 3. on page 7 is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Notes: 2. The maximum over/under voltage is limited by the input current except on the power supply pin.
DC ELECTRICAL CHARACTERISTICS
Test Conditions (unless otherwise specified): VD = 3.1 V to 3.5 V; T = -10°C to +70°C (Commercial Grade);
A
T = -40°C to +85°C (Automotive-D Grade); T = -40°C to +105°C (Automotive-E Grade)
A
A
Parameters
Symbol
ID
Min
Typ
Max
18
60
±10
-
Units
mA
mW
µA
Power Supply Current - Unloaded
Power Dissipation - Unloaded
Input Leakage Current
(Note 3)
(Note 3)
-
12
40
-
PD
-
IIN
-
-
Input Capacitance
IC
8
-
pF
High-Level Input Voltage
VIH
VIL
70%
-
-
VD
Low-Level Input Voltage
-
30%
-
VD
High-Level Output Voltage (IOH = -1.2 mA)
VOH
80%
-
VD
Low-Level Output Voltage (IOH = 1.2 mA)
VOL
-
-
20%
VD
Notes: 3. To calculate the additional current consumption due to loading (per output pin), multiply clock output
frequency by load capacitance and power supply voltage. For example, fCLK_OUT (49.152 MHz) * C
(15 pF) * VD (3.3 V) = 2.4 mA of additional current due to these loading conditions on CLK_OUT.
L
6
DS842F3
CIRRUS [ CIRRUS LOGIC ]
