CS2100-CP
Fractional-N Clock Multiplier
Features
Clock Multiplier / Jitter Reduction
General Description
The CS2100-CP is an extremely versatile system
clocking device that utilizes a programmable phase
lock loop. The CS2100-CP is based on a hybrid ana-
log-digital PLL architecture comprised of a unique
combination of a Delta-Sigma Fractional-N Frequency
Synthesizer and a Digital PLL. This architecture allows
for generation of a low-jitter clock relative to an exter-
nal noisy synchronization clock at frequencies as low
as 50 Hz. The CS2100-CP supports both I²C and SPI
for full software control.
The CS2100-CP is available in a 10-pin MSOP pack-
age in Commercial (-10°C to +70°C) and Automotive-
D (-40°C to +85°C) and Automotive-E (-40°C to
+105°C) grades. Customer development kits are also
available for device evaluation. Please see
for complete details.
Generates a Low Jitter 6 - 75 MHz Clock
from a Jittery or Intermittent 50 Hz to 30
MHz Clock Source
Highly Accurate PLL Multiplication Factor
– Maximum Error Less Than 1 PPM in High-
Resolution Mode
I²C / SPI™ Control Port
Configurable Auxiliary Output
Flexible Sourcing of Reference Clock
– External Oscillator or Clock Source
– Supports Inexpensive Local Crystal
Minimal Board Space Required
– No External Analog Loop-filter
Components
–
3.3 V
Timing Reference
Frequency Reference
PLL Output
Lock Indicator
I²C/SPI
Software Control
I²C / SPI
Auxiliary
Output
8 MHz to 75 MHz
Low-Jitter Timing
Reference
Fractional-N
Frequency Synthesizer
6 to 75 MHz
PLL Output
N
50 Hz to 30 MHz
Frequency
Reference
Output to Input
Clock Ratio
Digital PLL & Fractional
N Logic
http://www.cirrus.com
Copyright
Cirrus Logic, Inc. 2009–2015
(All Rights Reserved)
Cirrus Logic Confidential
OCT '15
DS840F3
CIRRUS [ CIRRUS LOGIC ]
