CS53L32A
Base-rate Mode
Parameter
Symbol
(Note 2)
(Note 2)
(Note 2)
Min
-
-
-
-
Typ
3.7
24.2
10
-
Max
-
-
-
0.17
High-rate Mode
Min
-
-
-
-
Typ
3.7
24.2
10
-
Max
-
-
-
0.09
Unit
Hz
Hz
Degree
dB
High Pass Filter Characteristics
Frequency Response
Phase Deviation
Passband Ripple
-3 dB
-0.1 dB
@ 20 Hz
Notes: 1. Referenced to typical full-scale input voltage (0.5 Vrms).
2. Filter response is not tested but is guaranteed by design.
3. Filter characteristics scale with output sample rate. For output sample rates, Fs, other than 48 kHz, the
0.01 dB passband edge is 0.4535x Fs and the stopband edge is 0.625x Fs.
4. The analog modulator samples the input at 6.144 MHz for an Fs equal to 48 kHz. There is no rejection
of input signals which are multiples of the sampling frequency (n x 6.144 MHz ±21.8 kHz where
n = 0,1,2,3...).
5. Group delay for Fs = 48 kHz, t
gd
= 10/48 kHz = 208 µs.
DS513F1
7