CDB5376
Multichannel Seismic Evaluation System
Features
Four-channel Seismic Acquisition Node
–
–
–
–
–
–
–
CS3301 geophone amplifiers (2x)
CS3302 hydrophone amplifiers (2x)
CS5372 dual
∆Σ
modulators (2x)
CS5376A quad digital filter (1x)
CS4373A
∆Σ
test DAC (1x)
Precision voltage reference
Clock recovery PLL
General Description
The CDB5376 board is used to evaluate the functionality
and performance of the Cirrus Logic multichannel seis-
mic chip set. Data sheets for the CS3301, CS3302,
CS4373A, CS5371/72, and CS5376A devices should be
consulted when using the CDB5376 evaluation board.
Screw terminals connect external differential geophone
or hydrophone sensors to the analog inputs of the mea-
surement channels. An on-board test DAC creates
precision differential analog signals for in-circuit perfor-
mance testing without an external signal source.
The evaluation board includes an 8051-type microcon-
troller with hardware SPI
™
and USB serial interfaces.
The microcontroller communicates with the digital filter
via SPI and with the PC evaluation software via USB.
The PC software controls register and coefficient initial-
ization and performs time domain, histogram, and FFT
frequency analysis on captured data.
ORDERING INFORMATION
CDB5376
Evaluation Board
On-board Microcontroller
– SPI™ interface to digital filter
– USB communication with PC
PC Evaluation Software
–
–
–
–
Register setup & control
FFT frequency analysis
Time domain analysis
Noise histogram analysis
Copyright
©
Cirrus Logic, Inc. 2006
(All Rights Reserved)
MAR ‘06
DS612DB2