CDB42L52
2.2
CODEC Configuration Tab
The “CODEC Configuration” tab provides high-level control of the CS42L52 register settings. Status text de-
tailing the CODEC’s specific configuration is shown in parenthesis or appears directly below the associated
control. This text will change depending on the setting of the associated control. A description of each con-
trol group is outlined below. See the CS42L52 data sheet for complete register descriptions.
Power Control - Register controls for powering down each device within the CODEC.
ADC Configuration - Controls for the input MUXs, input mixer (summing amp), microphone bias output, and
ADC/SPE mixer.
Serial Port Configuration - Controls for all settings related to the serial I/O data and clocks on the board.
DAC Configuration - Control for the signal source to the DAC and analog output mux.
Update - Reads all registers in the CS42L52 and reflects the current values in the GUI.
Reset - Resets the CS42L52.
Figure 2. CODEC Configuration Tab
8
DS680DB1
CIRRUS [ CIRRUS LOGIC ]
