CHINA
SEMICONDUCTOR
CORPORATION
Spec. No.
PS-LU-N32DSB4-A0R
A
Rev.
Precautions For Use -
1. Recommended Soldering conditions
Wave Soldering
Temperature(°C)
, and temperature should be controllable. Surface temperature of the device should
3. Static Electricity
a. Static electricity or surge voltage damages LEDs..
It is recommended that a wrist band or an anit-electrostatic glove be used
when handling the LEDs.
b. All devices, equipment and machinery must be properly grounded. It is
recommended that mesures be taken against surge voltage to the equipment
that mounts the LEDs.
Note: The specifications are subject to change without notice. Please contact us for updated information.
:
℃
be under 230
.
→℃
be shorter (+10
-1sec.). Power dissipation of iron should be smaller than 15W
http://www.csctw.com.tw
℃
≦
:
:
:
:
Model No
CSPR-N32DSB4-A0R
■
■
■
■
260(max.)
250
240
Preheat
105(max.)
0
Max. 60sec.
Time(sec.)
5 sec.
2. Soldering Iron
Basic SPEC. is
5sec. When 260
. If temperature is higher, time should
Page
5/5