CHENMKO ENTERPRISE CO.,LTD
P6SBMJ
SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-6.8 TO 200 VOLTS
600 WATTS PEAK POWER 5.0 WATTS STEADY STATE
FEATURES
* Plastic package
* 600W surge capability at 1ms
* Glass passivated chip junction in SMB Package
* Excellent clamping capability
* Low Zener lmpedance
* Fast response time: typically less than 1.0ps
from 0 volts to BV min.
SMB
* Typical IR less than 1 uA above 10V
* High temperature soldering guaranteed :
260oC/10 seconds at terminals
0.083 (2.11)
0.077 (1.96)
0.155 (3.94)
0.130 (3.30)
(1)
(2)
0.190 (4.57)
MECHANICAL DATA
Case: JEDEC SMB molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.096 (2.44)
0.084 (2.13)
Weight: 0.003 ounce 0.093 gram
0.060 (1.52)
0.030 (0.76)
(
)(max)
0.008 0.203
0.220 (5.59)
0.205 (5.21)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
SMB
Dimensions in inches and (millimeters)
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For Bidirectional use C or CA Suffix for types P6SBMJ6.8A thru types P6SBMJ200A
Electrical characteristics apply in both directions.
MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted )
RATINGS
SYMBOL
PPK
VALUE
UNITS
Watts
Peak Power Dissipation at TA = 25oC, Tp = 1ms ( Note1 )
Minimum 600
Steady State Power Dissipation at TL = 75oC
PD
IFSM
5.0
100
Watts
Amps
Peak Forward Surge Current 8.3ms Single Half
Sine-Wave Superimposed on Rated Load ( Note 2 )
oC
Operating and Storage Temperature Range
TJ, TSTG
-65 to +175
NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25oC per Fig. 2.
2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
3. PC Board Mounted on 0.2 X 0.2" ( 5 X 5mm ) copper pad area
2003-01
CHENMKO [ CHENMKO ENTERPRISE CO. LTD. ]
