CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
PSC
Radial Lead
@Super
low ESR, high temperature resistance and high ripple current capability
@Rated
voltage range : 2.5 to 16V
dc
@Endurance
: 2,000 hours at 105C
@Suitable
for DC-DC converters, voltage regulators and decoupling applications
for computer motherboards
@RoHS
Compliant
Low profile
Lower ESR
PSA
Lower ESR
PS
?SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
*Note
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
-55 to +105C
2.5 to 16V
dc
P20%
(M)
Rated voltageB1.15
I=0.2CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V
dc
)
0.08 max. (FA5 size : 0.12max.)
Z(-25C)/Z(+20C)[1.15
Z(-55C)/Z(+20C)[1.25
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours
at 105C.
Appearance
No significant damage
Capacitance change
[P20%
of the initial value
D.F. (tanE)
[150%
of the initial specified value
ESR
[150%
of the initial specified value
Leakage current
[The
initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,
90 to 95% RH for 1,000 hours.
Appearance
No significant damage
Capacitance change
[P20%
of the initial value
D.F. (tanE)
[150%
of the initial specified value
ESR
[150%
of the initial specified value
Leakage current
[The
initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance
No significant damage
Capacitance change
[P20%
of the initial value
D.F. (tanE)
[150%
of the initial specified value
ESR
[150%
of the initial specified value
Leakage current
[The
initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105C)
Characteristics
(at 20C, 120Hz)
(at 105C)
(at 20C after 2 minutes)
(at 20C, 120Hz)
Bias Humidity Test
Surge Voltage Test
Failure Rate
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.
?DIMENSIONS
[mm]
@Terminal
Code : E
FP0.5
FP0.5
Coated Case
FD+0.5max.
Fd
?MARKING
EX) 4V560MF
A
292
560
4
V
(FA5)
L'
15min.
4min.
Size code
fD
fd
F
fD'
L'
FA5
6.3
0.5
2.5
L+0.3max
(HB5, JB5)
HB5
8.0
JB5
10.0
0.8
3.5
5.0
FD+0.5max
L+1.5max
(1/2)
CAT. No. E1001K
CHEMI-CON [ UNITED CHEMI-CON, INC. ]
