CP34063
1.5A,Step-Up/Down/Inverting Switching Regulators
8
1
V
out
8
1
R
V
out
7
R
sc
V
in
6
2
R
sc
V
in
7
2
6
R
³
0 for
constant V
in
Figure 9. External Current Boost Connections for I
C
Peak Greater than 1.5 A
9a. External NPN Switch
9b. External NPN Saturated Switch
(See Note 8)
8. If the output switch is driven into hard saturation (non–Darlington configuration) at low switch currents (≤ 300 mA) and high driver currents
(≥ 30 mA), it may take up to 2.0
µs
to come out of saturation. This condition will shorten the off time at frequencies
≥
30 kHz, and is magnified
at high temperatures. This condition does not occur with a Darlington configuration, since the output switch cannot saturate. If a
non–Darlington configuration is used, the following output drive condition is recommended.
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN
Email: server@ceramate.com.tw
Tel:886-3-3214525
Http: www.ceramate.com.tw
Page 6 of 10
Rev 1.1 Jul.18,2003
Fax:886-3-3521052
CERAMATE [ CERAMATE TECHNICAL ]
