CAT1021, CAT1022, CAT1023
8 LEAD MSOP (R, Z)
0.38
0.28
0.0150
0.0110
0.1970
0.1890
5.00
4.80
S
0.0256 [0.65] BSC
3.10
2.90
0.1220
0.1142
0.0374
0.0295
0.95
0.75
0.0433 [1.10] MAX.
0.0059
0.0020
0.15
0.05
0.039 [0.10] MAX.
S
S
0.0150
0.0110
0.38
0.28
WITH PLATING
0.0091 0.23
0.0051 0.13
0.0050 [0.127]
BASE METAL
0.1220
0.1142
3.10
2.90
0.0276
0.0157
0.70
0.40
0˚ - 6˚
WITH PLATING
0.0118 [0.30] REF.
SECTION A - A
Notes:
(1) All dimensions are in mm Angles in degrees.
2
3
4
Does not include Mold Flash, Protrusion or Gate Burrs. Mold Flash, Protrusions or Gate Burrs shall not exceed 0.15 mm. per side.
Does not include Interlead Flash orProtrusion. Interlead Flash or Protrusion shall not exceed 0.25 mm per side.
Does not include Dambar Protrusion, allowable Dambar Protrusion shall be 0.08 mm.
(5) This part is compliant with JEDEC Specification MO-187 Variations AA.
(6) Lead span/stand off height/coplanarity are considered as special characteristics. (S)
(7) Controlling dimensions in inches. [mm]
Doc No. 3009, Rev. K
17
CATALYST [ CATALYST SEMICONDUCTOR ]
