CLM4125
CORPORATION
AC ELECTRICAL CHARACTERISTICS
The following specifications apply for Supply Voltage = +12, -10V, VCM = 0, RL ≥ 100KΩ and RS = 50Ω unless otherwise noted.
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25oC.
SYMBOL
SR1
CHARACTERISTICS
Slew Rate 1
TYP
3500
2250
Limit (Note 5)
3000
UNITS
CONDITIONS
VIN = ±4.5V, RL = 100Ω (Note 2)
VIN = ±4V, RL = 50Ω (Note 2)
VIN = ±100mVPP, RL = 50Ω
V/µs
SR2
Slew Rate 2
2000
SSBW
Small Signal Bandwidth
350
300
C
L ≤ 10pF
MHz
V
C
OUT = ±4.5V, RL = 100Ω
L ≤ 10pF
LSBW
Large Signal Bandwidth
Power Bandwidth
140
130
2.5
120
110
3.5
PBW
VIN = ±4V, CL ≤ 100pF
Rise Time
Fall Time
C
L ≤ 100pF
tr, tf
ns
ns
%
VO = 4VPP
RL = 50Ω, CL ≤ 10pF
O = 4VPP
tpd
Propagation Delay Time
Overshoot
2.0
3
V
RL = 50Ω, CL ≤ 10pF
O = 100mVPP
OS
V
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its rated operating conditions.
Note 2: Slew rate is measured with 50Ω source impedance at 25oC. For accurate measurements, the input slew rate should be at least
5000V/µs.
Note 3: The test circuit consists of the human body model of 120pF in series with 1500Ω.
Note 4: The maximum power dissipation is a function of TJ(max), θJA and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max) - TA)/θJA
.
Note 5: Limits are guaranteed by testing, correlation or periodic characterization.
Note 6: For M & N package, θJA is measured by soldering the unit directly on a printed circuit board and V- pins are connected to 2 square
inches of 2 oz copper.
CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025