PRELIMINARY
CM2400-05
Universal Serial Bus Transceiver with Level Translator
Features
•
•
•
•
•
•
•
•
•
•
•
•
Complies with USB Specification Rev 1.1 & 2.0
Supports Full Speed Mode (12Mbit/s)
Integrated 5V to 3.3V regulator
Bi-directional driver input/output pins
Two single-ended receivers with hysteresis
USB detection of V
BUS
via level translator
Stable RCV output during SE0 condition
Low power operation
Supports 1.65 to 3.6V I/O voltage levels
Full industrial operating range -40 to 85
°
C
Available in tiny HBCC-16 and TQFN-16 packages
Lead-free versions available
Product Description
The CM2400-05 Universal Serial Bus (USB) trans-
ceiver is fully compliant with USB specification, revi-
sions 1.1 and 2.0. It supports a speed of 12Mbits/s
(Full Speed Mode).
An internal level shifter allows interface to Application
Specific Integrated Circuits (ASICs) and Programma-
ble Logic Devices (PLDs) running at core voltages of
1.65V to 3.6V.
An internal 5V to 3.3V regulator is used to power the
CM2400-05 USB transceiver via the USB supply V
BUS
.
V
M
/V
MO
and V
P
/V
PO
are bi-directional interface pins. In
one mode they function as the differential driver input
data. In another mode they function as the output of
the single ended receivers. This mode is configured by
the OE pin.
This device is ideal for portable electronic devices such
as mobile phones, digital still cameras, PDAs (Personal
Digital Assistants) and IAs (Information Appliances).
The CM2400-05 is manufactured in small form-factor
16-lead HBCC or TQFN packages to conserve board
space and is available with optional lead-free finishing.
Applications
•
•
•
•
•
Wireless Handsets
Digital Still Cameras
PDAs (Personal Digital Assistants)
IAs (Information Appliances)
Pin and functionally compatible with Philips
ISP1102
Simplified Block Schematic
V
CC
Voltage
Detector
ENABLE
USB_DET
Voltage
Regulator
V
BUS
V
REG
OE
SPND
V
M
/V
MO
*
V
P
/V
PO
*
RCV
LEVEL TRANSLATOR
ENUM
V
PU
D+
D-
* Pins are bi-directional based on OE state:
If OE = V
CC
, then V
M
/V
MO
and V
P
/V
PO
are configured as outputs.
If OE = GND, then V
M
/V
MO
and V
P
/V
PO
are configured as inputs.
GND
©
2004 California Micro Devices Corp. All rights reserved.
06/30/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
1