Technical Specification
S15-48-12
48Vin 12Vout 1.25A
BTCPower
TM
Start up Information
Scenario #1: Initial Start up from power supply
On/Off function enabled, the unit starts via input
voltage Vin, see Fig 7.
Time
t0
Comments
On/Off pin is On: system front-end power is switched
on, Vin to unit begins to rise.
t1 Vin crosses Under Voltage Lockout protection circuit
threshold: the unit enabled to be on
t2 The unit begins to turn on ( unit turn-on delay).
t3
Unit output voltage reaches 100% of normal
voltage.
For this example, the unit total start up time (t3- t1) is
typically 200us.
Scenario #2: Initial Start up using On/Off Pin
With Vin previously powered, the unit starts via On/Off
pin, see Fig 8.
Comments
Vin at nominal value.
Arbitrary time when On/Off pin is enabled (Unit
enabled)
t2
End of unit turn-on delay
t3
Unit Vout reaches 100% of nominal voltage.
For this example, the unit total start up time (t3- t1) is
typically 300us.
Time
t0
t1
Fig 7 Start up waveform
Fig 8. Start up using On/Off pin
Broadband TelCom Power, Inc. –
1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
P 9 of 12
Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: sales@btcpower.com PS S15-48-12 Rev4.2 21-1-05
BTCPOWER [ BROADBAND TELCOM POWER, INC. ]
