TISP7xxxF3 (MV, HV) Overvoltage Protector Series
Thermal Information
Rating
Symbol
Value
Unit
Non-repetitive peak on-state pulse current, 0 °C < T < 70 °C (see Notes 5, 6 and 7)
A
1/2 (Gas tube differential transient, 1/2 voltage wave shape)
2/10 (Telcordia GR-1089-CORE, 2/10 voltage wave shape)
1/20 (ITU-T K.22, 1.2/50 voltage wave shape, 25 Ω resistor)
8/20 (IEC 61000-4-5, combination wave generator, 1.2/50 voltage wave shape)
10/160 (FCC Part 68, 10/160 voltage wave shape)
320
175
90
150
90
I
A
PPSM
4/250 (ITU-T K.20/21, 10/700 voltage wave shape, dual)
0.2/310 (CNET I 31-24, 0.5/700 voltage wave shape)
70
65
5/310 (ITU-T K.20/21, 10/700 voltage wave shape, single)
5/320 (FCC Part 68, 9/720 voltage wave shape)
65
65
10/560 (FCC Part 68, 10/560 voltage wave shape)
45
10/1000 (Telcordia GR-1089-CORE, 10/1000 voltage wave shape)
40
Initially, the TISP® device must be in thermal equilibrium at the specified T . The impulse may be repeated after the TISP® device
A
NOTES: 5.
returns to its initial conditions. The rated current values may be applied either to the R to G or to the T to G or to the T to R
terminals. Additionally, both R to G and T to G may have their rated current values applied simultaneously (In this case the total
G terminal current will be twice the above rated current values).
6. See Applications Information for details on wave shapes.
7. Above 70 °C, derate I linearly to zero at 150 °C lead temperature.
PPSM
MARCH 1994 - REVISED MARCH 2006
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
BOURNS [ BOURNS ELECTRONIC SOLUTIONS ]
