TISP7xxxH3SL Overvoltage Protector Series
Description (continued)
This TISP7xxxH3SL range consists of fifteen voltage variants to meet various maximum system voltage levels (58 V to 300 V). They are
guaranteed to voltage limit and withstand the listed international lightning surges in both polarities. These high current protection devices are in
a 3-pin single-in-line (SL) plastic package and are supplied in tube pack. For alternative impulse rating, voltage and holding current values in
SL packaged protectors, consult the factory. For lower rated impulse currents in the SL package, the 45 A 10/1000 TISP7xxxF3SL series is
available.
These monolithic protection devices are fabricated in ion-implanted planar structures to ensure precise and matched breakover control and are
virtually transparent to the system in normal operation.
Absolute Maximum Ratings, TA = 25
°C
(Unless Otherwise Noted)
Rating
‘7070
‘7080
‘7095
‘7125
‘7135
‘7145
‘7165
‘7180
‘7200
‘7210
‘7220
‘7250
‘7290
‘7350
‘7400
Symbol
Value
±
58
±
65
±
75
±100
±110
±120
±130
±145
±150
±160
±170
±200
±230
±275
±300
500
350
250
225
200
200
200
130
100
55
60
0.9
400
-40 to +150
-65 to +150
Unit
Repetitive peak off-state voltage, (see Note 1)
V
DRM
V
Non-repetitive peak on-state pulse current (see Notes 2, and 3)
2/10 (Telcordia GR-1089-CORE, 2/10 voltage wave shape)
8/20
µs
(IEC 61000-4-5, 1.2/50
µs
voltage, 8/20 current combination wave generator)
10/160
µs
(FCC Part 68, 10/160
µs
voltage wave shape)
4/250 (ITU-T K.20/21, 10/700 voltage wave shape, dual)
0.2/310 (CNET I 31-24, 0.5/700 voltage wave shape)
5/310 (ITU-T K.20/21, 10/700 voltage wave shape, single)
5/320
µs
(FCC Part 68, 9/720
µs
voltage wave shape)
10/560
µs
(FCC Part 68, 10/560
µs
voltage wave shape)
10/1000 (Telcordia GR-1089-CORE, 10/1000 voltage wave shape)
Non-repetitive peak on-state current (see Notes 2, 3 and 4)
20 ms (50 Hz) full sine wave
16.7 ms (60 Hz) full sine wave
1000 s 50 Hz/60 Hz a.c.
Initial rate of rise of on-state current, Exponential current ramp, Maximum ramp value < 200 A
Junction temperature
Storage temperature range
I
TSP
A
I
TSM
di
T
/dt
T
J
T
stg
A
A/µs
°C
°C
NOTES: 1. Derate value at -0.13%/°C for temperatures below 25
°C.
2. Initially the TISP7xxxH3 must be in thermal equilibrium.
3. These non-repetitive rated currents are peak values of either polarity. The rated current values may be applied to any terminal
pair. Additionally, both R and T terminals may have their rated current values applied simultaneously (in this case the G terminal
return current will be the sum of the currents applied to the R and T terminals). The surge may be repeated after the
TISP7xxxH3 returns to its initial conditions.
4. EIA/JESD51-2 environment and EIA/JESD51-3 PCB with standard footprint dimensions connected with 5 A rated printed wiring
track widths. Derate current values at -0.61 %/°C for ambient temperatures above 25
°C.
MARCH 1999 - REVISED FEBRUARY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
BOURNS [ BOURNS ELECTRONIC SOLUTIONS ]
