4.4 Standard CMOS Setup
The Standard Setup is used for the basic hardware system
configuration. The main function is for Data/Time and Floppy/Hard Disk
Drive settings. Please refer to the following screen for the setup. When
the IDE hard disk drive you are using is larger than 528MB, you must
set the HDD mode to
mode. Please use the IDE Setup Utility in
LBA
BIOS SETUP to install the HDD correctly.
AMIBIOS SETUP – STANDARD CMOS SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yyyy) : Thu Jan 03, 2002 Base Memory : 0 KB
Time (hh/mm/ss)
: 19:04:12
Extd Memory : 0 MB
Floppy Drive A:
Floppy Drive B:
1.44MB, 3.5”
Not Installed
LBA Blk PIO 32Bit
Type
Pri Master : Auto
Pri Slave : Auto
Size
Cyln Head WPcom Sec Mode Mode Mode Mode
Sec Master : Auto
Sec Slave : Auto
Boot Sector Virus Protection :
Disabled
ꢄꢅ
:Sel
Month:
Day:
Year: 1980 - 2099
Jan - Dec
01 - 30
ESC:Exit
PgUp/PgDn: Modify
F1:Help F2/F3:Color
ꢂ
Date:
The date format is <day>, <date> <month> <year>. Press <F3> to
show the calendar.
day
The day, from Sun to Sat, determined by the BIOS and is
display-only
date
month
year
The date, from 1 to 31 (or the maximum allowed in the month)
The month, Jan through Dec.
The year, from 1900 through 2099
ꢂ
Time:
The time format is <hour> <minute> <second>. The time is
calculated based on the 24-hour military-time clock. For example,
1 p.m. is 13:00:00.
35