Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-6252 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-6252 delivery package
contains the following items:
ꢀ HS-6252 Board x 1
ꢀ Utility CD Disk x 1
ꢀ ATA/100 IDE flat cable x 1
ꢀ FDD flat cable x 1
ꢀ Printer cable with bracket x 1
ꢀ RS-232 COM Port cables with bracket x 2
ꢀ 8-pin USB split type cable with bracket x 1
ꢀ MIC In/Speaker In 8-pin cable + 2 phone jacks with bracket x 1
ꢀ 5-pin ATX power cable x 1
ꢀ Jumper Bag x 1
ꢀ User’s Manual
IMPORTANT: Before you turn on the power of your system, please
set JP5 to Short 1-2 for normal operation.
5
BOSER [ BOSER TECHNOLOGY CO., LTD ]
