4.8 Peripheral Setup
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the BIOS
issue a series of commands to affect the transfer to or from the disk
drive, PIO allows the BIOS to tell the controller what it wants and then
let the controller and the CPU perform the complete task by them. This
is much simpler and more efficient (also faster).
AMIBIOS SETUP – PERIPHERAL SETUP
(C)1999 American Megatrends, Inc. All Rights Reserved
OnBoard IDE
OnBoard FDC
Primary
Auto
Auto
Available Options:
` Disabled
Primary
Secondary
Both
OnBoard Serial Port 1
OnBoard Serial Port 2
Serial Port2 Mode
Receiver Polarity
Transmitter Polarity
OnBoard Serial Port3
Serial Port3 IRQ
Auto
Normal
Non-Inverted
Non-Inverted
Audo
Auto
OnBoard Serial Port4
Serial Port4 Mode
Serial Port4 IRQ
Auto
Normal
Auto
Receiver Polarity
Transmitter Polarity
OnBoard Prarllel Port
Parallel Port Mode
EPP Version
Non-Inverted
Non-Inverted
Auto
ECP
N/A
Parallel Port IRQ
Parallel Port DMA Channel
Auto
Auto
ESC:Exit
ꢄꢅ:Sel
PgUp/PgDn: Modify
F1:Help F2/F3:Color
34