Chapter 2
Unpacking
This chapter explains unpacking the board, checking the equipment
and documentation and where to go from there.
2.1 Opening the Delivery Package
The HS-3000/4M is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity. Integrated circuits will
sometimes come out of their sockets during shipment. Examine all
integrated circuits, particularly the BIOS, processor, memory modules,
ROM-Disk, and keyboard controller chip to ensure that they are firmly
seated. The HS-3000/4M delivery package contains the following
items:
ꢂHS-3000/4M Board x 1
ꢂIDE port flat cable x 1
ꢂFDD port flat cable x 1
ꢂPrinter + one COM flat cable with bracket x 1
ꢂTwo COM flat cable with bracket x 1
ꢂUtility CD Disk x 1
ꢂUser’s Manual x 1
5
BOSER [ BOSER TECHNOLOGY CO., LTD ]
