Ultra Low Noise, Ultra Compact, Isolated type DC-DC Converter
b
6Watt BLC05 Series
13. Vibration and impact tests
Vibration
Impact
10 to 55Hz
Total amplitude 1.52mmp-p (2H for each of three directions)
Sweep time 15 minutes
100G (3 times for each of 3 directions, total 18 times)
Acceleration
Impact time 6ms
14. Cleaning
This product is not made for immersible cleaning. Use of no-clean flux is recommended
15. Precautions for use
To ensure user’s safety, check specifications before using the product and always observe the following
precautions for use.
• This product is intended for use in general electronics equipment (office equipment, communication
equipment, measurement equipment). Do not use the product for medical equipment, nuclear
equipment, trains, etc., whereby human life or property may be directly affected by damaged product.
Consult with us for any use other than for such general electronics equipment.
• Minor changes and component parts changes that do not affect contents of the specifications will be
made due to characteristic improvement of the product and other reasons without prior notice.
• This product is not suitable for parallel operation.
• Do not use connectors and sockets for mounting the product. Contact resistance may have an adverse
effect on the performance. Use the soldering method for mounting on the printed circuit board.
• This equipment has a built-in over current protection circuit but avoid a prolonged short circuit which
may lead to failure.
• This product may be damaged if used under nonstandard electrical conditions or nonstandard
environmental conditions including temperature. Ensure use within the standards.
• Avoid using this product in a place that generates corrosive gas or is dusty.
• This product may be damaged by static electricity. Make sure that the workplace is guarded against
static buildup and static electricity on operators by use of proper grounding.
• This product has no built-in function for over voltage protection.
• This product does not come with a test report.
16. Warranty
The warranty term of the product is one year after shipment. Should the product become defective within the
warranty period due to our design or workmanship, the product will be repaired free of charge or replaced.
However, this warranty does not cover products which have been subjected to unauthorized inner
modifications, etc.
The scope of our warranty is limited to that of the said product.
17. Contact
If you have any further technical questions for this product, please contact us.
E-mail: info@bellnix.com
URL: http://www.bellnix.com
11
BDD20170524_A01
DC-DC Converter
BELLNIX [ Bellnix ]
