CX5140
https://www.beckhoff.com/cx5140
Device modification for CX5120, CX5130, CX5140 and CX9020 Embedded PCs according to
the requirements for ATEX, IECEx and FM certification. The modification is mandatory for
the usage of CX5120, CX5130, CX5140 and CX9020 in hazardous areas, Zone 2/22
respectively Class I, Div. 2.
It includes the modification and repositioning of the device label as well as a mounting
bracket installed ex works for mechanical locking of the connectors.
Product labeling:
CX2900-0107
ATEX: II 3 G Ex nA IIC T4 Gc and II 3 D Ex tc IIIC T135 °C Dc
IECEx: Ex nA IIC T4 Gc and Ex tc IIIC T135 °C Dc
cFMus: CL I, DIV 2. GP A, B, C, D und CL I, Zn 2 AEx/Ex ec IIC T4 Gc
Read the device documentation for use in hazardous areas carefully.
Optional interfaces
CX5140-N010
DVI-D interface, additional DVI-D port for clone or extended display mode.
Is not supported by Windows Embedded Compact 7 or TwinCAT/BSD.
DisplayPort interface, additional DisplayPort for clone or extended display mode.
Is not supported by Windows Embedded Compact 7 or TwinCAT/BSD.
CX5140-N011
CX5140-N020
CX5140-N030
audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround
RS232 interface, D-sub plug, 9-pin (RXD, TXD, RTS, CTS)
RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo,
termination on
CX5140-N031
RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo,
termination on
CX5140-N031-0001
CX5140-N031-0002
CX5140-N031-0003
CX5140-N031-0004
RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo,
termination off
RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination
off
RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination
on
CX5140-M112
CX5140-B110
CX5140-M310
CX5140-B310
CX5140-M510
CX5140-B510
CX5140-M930
CX5140-B930
2 x EtherCAT master interface
EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
PROFIBUS master interface, D-sub socket, 9-pin
PROFIBUS slave interface, D-sub socket, 9-pin
CANopen master interface, D-sub plug, 9-pin
CANopen slave interface, D-sub plug, 9-pin
PROFINET RT, controller interface, Ethernet (2 x RJ45 switch)
PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
EtherNet/IP adapter interface, Ethernet (2 x RJ45 switched)
Availability: on request
CX5140-B950
Accessories
Accessories
DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX
system (singles out the VGA signals of the DVI-I interface).
CX1900-0101
Technical changes reserved
As of 21.06.2021 | Site 4 of 5
BECKHOFF [ Beckhoff ]
