CX2043
https://www.beckhoff.com/cx2043
Ordering information
CX2043-0100
CX2043-0160
CX2043-0161
CX2043-0162
CX2043-0163
CX2043-0170
CX2043-0175
CX2043-0185
no operating system, no TwinCAT
Windows 10 IoT Enterprise 2019 LTSC 32 bit, no TwinCAT
Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 PLC runtime
Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC PTP runtime
Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC I runtime
Windows 10 IoT Enterprise 2019 LTSC 64 bit, no TwinCAT
Windows 10 IoT Enterprise 2019 LTSC 64 bit, TwinCAT 3 runtime (XAR)
TwinCAT/BSD, TwinCAT 3 runtime (XAR)
CX20x3-016x: only 4 GB RAM can be used with Windows 10 IoT Enterprise 2019 LTSC 32 Bit
TwinCAT/BSD requires a CFast flash card with a minimum capacity of 20 GB
Windows 10 IoT Enterprise requires a CFast flash card with a minimum capacity of 40 GB.
TwinCAT 3 runtime (XAR) is preinstalled, without licenses. Please order TwinCAT 3 licenses separately from the TwinCAT 3 Price List.
Options
Options
Operating system preequipped on 2½-inch HDD/SSD for CX20x0, CX20x2 and CX20x3.
Requires the extension module CX2550-0020 and one 2½-inch HDD/SSD.
CX2900-0010
Memory extension to 16 GB DDR4 RAM, instead of 8 GB DDR4 RAM for CX2033 and
CX2043. For the CX2033 this extension reduces the maximum permissible ambient
temperature to 50 °C. For operation of the CX2033 up to 60 °C the active cooling CX2900-
CX2900-0305
0301 is required.
Optional interfaces
DVI-D interface, additional DVI-D port for clone or extended display mode.
Is not supported by TwinCAT/BSD.
CX2043-N010
DisplayPort interface, additional DisplayPort for clone or extended display mode.
Is not supported by TwinCAT/BSD.
CX2043-N011
CX2043-N030
CX2043-N031
RS232 interface, D-sub plug, 9-pin
RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo,
termination on
RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo,
termination on
CX2043-N031-0001
CX2043-N031-0002
CX2043-N031-0003
RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo,
termination off
RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination
off
RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination
on
CX2043-N031-0004
CX2043-M112
2 x EtherCAT master interface
Technical changes reserved
As of 30.08.2021 | Site 3 of 4
BECKHOFF [ Beckhoff ]
