ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage .................................................... (V–) –0.7V to (V+) +0.7V
Output Short-Circuit
(2)
.............................................................. Continuous
Operating Temperature ................................................. –40°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
(2) Short-circuit to ground, one amplifier per package.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
PACKAGE/ORDERING INFORMATION
PACKAGE
DRAWING
NUMBER
(1)
TEMPERATURE
RANGE
PRODUCT
Single
OPA134PA
OPA134UA
Dual
OPA2134PA
OPA2134UA
Quad
OPA4134PA
OPA4134UA
PACKAGE
8-Pin Plastic DIP
SO-8 Surface-Mount
8-Pin Plastic DIP
SO-8 Surface-Mount
14-Pin Plastic DIP
SO-14 Surface-Mount
006
182
006
182
010
235
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book.
TYPICAL PERFORMANCE CURVES
At T
A
= +25°C, V
S
=
±15V,
R
L
= 2kΩ, unless otherwise noted.
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
0.1
R
L
2kΩ
600Ω
SMPTE INTERMODULATION DISTORTION
vs OUTPUT AMPLITUDE
5
1
G = +1
f = 1kHz
R
L
= 2kΩ
0.01
THD+Noise (%)
IMD (%)
0.1
OPA134
OP176
0.010
OPA134
Baseline
0.001
G = +10
0.0001
G = +1
V
O
= 3Vrms
0.00001
10
100
1k
Frequency (Hz)
10k
100k
0.001
0.0005
30m
0.1
1
Output Amplitude (Vpp)
10
30
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
3
OPA134/2134/4134
BURR-BROWN [ BURR-BROWN CORPORATION ]
