PIN CONFIGURATION
Top View
DIP/SOIC
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integral circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet
published specifications.
PACKAGE/ORDERING INFORMATION
PACKAGE
DRAWING
NUMBER
(1)
006
182
TEMPERATURE
RANGE
0°C to +70°C
0°C to +70°C
•
(1)
Ref
1
10kΩ
–In
2
10kΩ
+In
3
100kΩ
V–
4
INA106
NOTE: (1) Pin 1 indentifier for SO-8 package.
Model number identification may be abbreviated
on SO-8 package due to limited available space.
5
Sense
6
Output
100kΩ
7
V+
8
NC
ABSOLUTE MAXIMUM RATINGS
Power Supply Voltage ......................................................................
±18V
Input Voltage Range ............................................................................
±V
S
Operating Temperature Range: P, U ................................ –40°C to +85°C
Storage Temperature Range ............................................ –40°C to +85°C
Lead Temperature (soldering, 10s): P .......................................... +300°C
Wave Soldering (3s, max) U .......................................................... +260°C
Output Short Circuit to Common .............................................. Continuous
PRODUCT
INA106KP
INA106U
PACKAGE
8-Pin Plastic DIP
SO-8 Surface Mount
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN
assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject
to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not
authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.
®
3
INA106
BURR-BROWN [ BURR-BROWN CORPORATION ]
