MECHANICAL DATA
MPDS095 – APRIL 2001
DTC (R-PDSO-G18)
PLASTIC SMALL-OUTLINE
C
0.4625 (11,75)
0.4469 (11,35)
–A–
18
0°–8°
10
0.050 (1,27)
0.016 (0,40)
D
–B–
0.2992 (7,60)
0.2914 (7,40)
0.419 (10,65)
0.394 (10,00)
M
M
0.010 (0,25)
B
Index
1
9
Area
E
E
0.0118 (0,30)
0.004 (0,10)
0.029 (0,75)
0.010 (0,25)
0.050 (1,27)
x 45°
0.1043 (2,65)
0.0926 (2,35)
Base
Plane
–C–
Seating
Plane
0.0125 (0,32)
0.0091 (0,23)
0.020 (0,51)
0.013 (0,33)
0.010 (0,25) C A
0.004 (0,10)
M
M
S
B
4202498/A 03/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body length dimension does not include mold flash,
protrusions or gate burrs. Mold flash, protrusions and
gate burrs shall not exceed 0.006 (0,15) per side.
D. Body width dimension does not include inter-lead
flash or protrusions. Inter-lead flash and protrusions
shall not exceed 0.010 (0,25) per side.
E. The chamfer on the body is optional. If it is not
present, a visual index feature must be located within
the cross-hatched area.
F. Falls within JEDEC MS-013-AB.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265