ATM0700L6D-T(AZ DISPLAYS) TFT MODULE VER1.2
3.0 PIN ASSIGNMENT
Connector on LCM : HIROSE DF19G-20P-1H or compatible,mating with HIROSE DF19-20S-1C or
compatible
Pin No.
Symbol
Function
1
2
TX0-
TX0+
VSS*1
TX1-
Negative LVDS differential data input(R0-R5,G0)*3
Positive LVDS differential data input(R0-R5,G0)*3
GROUND
3
4
Negative LVDS differential data input(G1-G5,B0-B1)*3
Positive LVDS differential data input(G1-G5,B0-B1)*3
GROUND
5
TX1+
VSS*1
TX2-
6
7
Negative LVDS differential data input(B2-R5,HS,VS,DE)*3
Positive LVDS differential data input(B2-R5,HS,VS,DE)*3
GROUND
8
TX2+
VSS*1
CLK-
9
10
11
12
13
14
15
16
17
18
19
20
Clock Signal(-)
CLK+
VSS*1
NC*2
NC*2
VDD
Clock signal(+)
GROUND
Non Connection(open)
Non Connection(open)
+3.3V POWER SUPPLY FOR LOGIC AND LCM POWER
+3.3V POWER SUPPLY FOR LOGIC AND LCM POWER
+5.0V POWER SUPPLY FOR BACKLIGHT
POWER GROUND FOR BACKLIGHT
BACKLIGHT ON/OFF/DIMMING CONTROL(PWM:100~1000HZ, 0~100%)
GROUND
VDD
VLED
GLED
PWM
VSS*1
NOTE 1) PLEASE CONNECT VSS PIN TO GROUND. DON’T USE IT AS NO-CONNECT NOR CONNECTION WITH HIGH IMPEDANCE.
NOTE 2) PLEASE CONNECT NC PIN TO NOTHING. DON’T CONNECT IT TO GROUND NOR TO OTHER SIGNAL INPUT.
NOTE 3) REFER TO NEXT PAGE.
4
AZ DISPLAYS
AZDISPLAYS [ AZ DISPLAYS ]
