SMPS Stacked MLC Capacitors
(SM Style) SM Military Styles DSCC Dwg. #87106 & #88011
Insulation Resistance.
Ordering Information
At +25°C, rated voltage: 100K MΩ or 1,000 MΩ-μF,
whichever is less.
Part Number: The complete part number shall be as follows:
X7R:
87106
XXX
At +125°C, rated voltage: 10K MΩ or 100 MΩ-μF,
whichever is less.
_________________
Drawing number
______________
Dash number
(see list)
Dielectric Withstanding Voltage. Dielectric withstanding volt-
age shall be 250 percent of rated voltage except 500V rated
parts at 150 percent of rated voltage.
Ordering Data. The contract or purchase order should
specify the following:
a. Complete part number.
Capacitance Tolerance. J = 5 percent, K = 10 percent,
M = 20 percent.
b. Requirements for delivery of one copy of the quality con-
formance inspection data with each shipment of parts by
the manufacturer.
Solderability of Terminals. In accordance with MIL-PRF-
49470.
c. Whether the manufacturer performs the group B tests, or
provides certification of compliance with group B require-
ments.
d. Requirements for notification of change of products to
acquiring activity, if applicable.
Resistance to Soldering Heat. In accordance with MIL-STD-
202, method 210, condition B, for 20 seconds.
e. Requirements for packaging and packing.
Shock. In accordance with MIL-PRF-49470.
Source of Supply.
Vendor CAGE
Vendor name
number
and address
_____________
_________________________
Immersion Cycling. In accordance with MIL-PRF-49470.
Moisture Resistance. In accordance with MIL-PRF-49470.
96095
Olean Advanced Products
A Division of AVX Corporation
1695 Seneca Avenue
Olean, NY 14760
Performance Characteristics
Life. Life shall be 200 percent of rated voltage except 500V
rated parts at 120 percent of rated voltage applied at +125°C for
1,000 hours.
Operating Temperature Range. The operating temperature
range shall be -55°C to +125°C.
Electrical Characteristics.
Thermal Shock. MIL-STD-202, method 107, test condition A,
except high temperature is +125°C.
Rated Voltage. See tables on pages 22, 23, 24 & 25.
Capacitance. Measured in accordance with method 305 of
MIL-STD-202 (1KHz at 1.0Vrms, open circuit voltage, at +25°C).
Voltage Conditioning. In accordance with MIL-PRF-49470,
except 500V rated parts at 120 percent of rated voltage at
+125°C.
Dissipation Factor (+25°C). X7R: Dissipation factor shall be
2.5 percent maximum (measured under the same conditions
as capacitance.) C0G: Dissipation factor shall be 0.15 percent
maximum.
Terminal Strength. MIL-STD-202, method 211, condition B,
except that each lead shall be bent away from the body 90
degrees from the original position and back, two bends.
Temperature Coefficient.
DSCC Dwg.
Bias = 0 volt Bias = rated voltage
88011 All Voltages
0 30 ppm/°C
15ꢀ
0 30 ppm/°C
+15, -25ꢀ
87106 50 WVDC
Marking. Marking shall be in accordance with MIL-STD-1285,
except the part number shall be as specified in paragraph 1.2
of 87106, or 88011 with the manufacturer’s name or code and
date code minimum, except case sizes 4 and 5 shall be marked
with coded cap and tolerance minimum. Full marking shall be
included on the package.
and 100 WVDC
87106 200 WVDC
87106 500 WVDC
15ꢀ
15ꢀ
+15, -40ꢀ
+15, -50ꢀ
20