Military Glass Capacitors
MIL-PRF-11272/13, /14, /15
CY06, 07, 08
APPLICATIONS
These precision miniature glass capacitors, AVX style CY0,
meet or exceed all requirements of MIL-PRF-11272.
Constructed of a fused monolithic capacitive element in a
rectangular case with gold-plated radial Dumet leads, this
series permits high packaging efficiency for printed circuit
applications where extremely stable, low-loss capacitors
are required.
CY06C
786C
AVX
AVX
CY07C
821F
AVX
CY08C
202J
CY06
CY07
L
CY08
T
PERFORMANCE CHARACTERISTICS
Tolerance:
Available tolerances for each value of capaci-
tance are shown in the ordering information table. For codes,
refer to the Part Numbers paragraph.
Temperature Coefficient:
+140 ±25 ppm/°C at 100 kHz.
TC will track and retrace to within ±5 ppm. Capacitance drift
is less than 0.1% or 0.1 pF, whichever is greater.
Voltage Coefficient:
Zero.
Losses:
Extremely low, and remain relatively low at elevated
temperatures. Dissipation factor at 1 kHz and 25°C is less
than 0.001 for values greater than 100 pF and less than
0.002 for values of 100 pF and below.
Life:
After 2,000 hours at 125°C with 150% of rated voltage
applied, capacitance change is less than 0.5% or 0.5 pF;
dissipation factor is less than 0.0025 for values above 100
pF and less than 0.0045 for values of 100 pF and below.
Insulation Resistance:
Greater than 100,000 megohms at
25°C; greater than 10,000 megohms at 125°C.
Voltage/Temperature Rating:
300 WVDC over the
temperature range of -55°C to +125°C with no derating
required.
Additional performance details are given in the AVX
“Performance Characteristics of Multilayer Glass Dielectric
Capacitors” technical paper.
W
31.75
(1.250)
Min.
S
1.27
±0.51
(.050
±.020)
Leads on centerline
within
±0.51
(±.020)
DIMENSIONS:
Case
Size
CY06
CY07
CY08
millimeters (inches)
W
±0.25
(±0.010)
5.08
(0.200)
7.62
(0.300)
7.62
(0.300)
L
±0.13
(±0.005)
7.62
(0.300)
7.62
(0.300)
12.70
(0.500)
T
±0.13
(±0.005)
2.92
(0.115)
2.92
(0.115)
2.92
(0.115)
S
±0.51
(±0.020)
5.08
(0.200)
5.08
(0.200)
10.16
(0.400)
Weight
(Grams)
.3 – .4
.4 – .5
.7 – .8
Note:
All leads are 24 AWG, 0.51 ± .05 (0.020 ± 0.002) diameter. Leads are
solderable and weldable gold-plated Dumet, per MIL-STD-1276, Type D.
33
AVX [ AVX CORPORATION ]
