Applications Versatility
AVX
AVX’s Card-Edge line of standards and
specials meet the requirements of a wide
variety of applications. Connectors are
available with either single or dual read outs.
They may apply to single, double and
multilayer boards up to 178 contacts.
Standard contact is bifurcated for dual points
and solderless printed circuit press-fit.
of mating while available in either
Consult factory or the AVX distributor near
you for other possible series offerings.
semi-bellows or cantilever. Select from such
terminations as straight or right angle, wire
wrap, printed circuit and solder eyelet.
Mounting possibilities include printed circuit
Motherboard to
daughter card
Wire wrap to
daughter card
Parallel boards
Contact Styles
Contact tail styles
Contact style
ITEM
DESCRIPTION
MATING SIDE TO
CONTACT TAIL
CONFIG.
1.
Solder eyelet hole: soldering discrete
wire to contact tail
Recommended wire size
(18 AWG max.)
2.
3.
4.
5.
Rectangle solder type: flow solder
connector to the motherboard
PCB finished hole size
.050"
CANTILEVER SEMI-BELLOWS
.025" square solder post: flow solder
connector to the motherboard
PCB finished hole size
.035"
SERIES
6333
SERIES
6007
6352
.025" square wire wrap post: use with
automatic wire wrap machine
Recommended wire size
(30 AWG typ.)
Cantilever: Where controlled normal
forces with low cost is desired.
Semi-Bellows type: Where short P.C.
board pad length and lower insertion
forces are required.
.025" press-fit post VARIPIN™: press-
fit connector into the motherboard
(contact replaceable)
PCB finished hole size
.040" .003"
2
KYOCERA AVX [ KYOCERA AVX ]
