HFBR-0400Z Series Evaluation Kits
HFBR-0410Z ST Evaluation Kit
Contains the following:
Package and Handling Information
Package Information
All HFBR-0400Z Series transmitters and receivers are
housed in a low-cost, dual-inline package that is made
of high strength, heat resistant, chemically resistant,
and UL 94V-O flame retardant ULTEM® plastic (UL File
#E121562). The transmitters are easily identified by the
light grey color connector port. The receivers are easily
identified by the dark grey color connector port. (Black
color for conductive port). The package is designed for
auto-insertion and wave soldering so it is ideal for high
volume production applications.
x
One HFBR-1412Z transmitter
x
One HFBR-2412Z five megabaud TTL receiver
x
Three meters of ST connectored 62.5/125 μm fiber
optic cable with low cost plastic ferrules.
x
Related literature
HFBR-0414Z ST Evaluation Kit
Includes additional components to interface to the trans-
mitter and receiver as well as the PCB to reduce design
time. Contains the following:
Handling and Design Information
Each part comes with a protective port cap or plug cov-
ering the optics. These caps/plugs will vary by port style.
When soldering, it is advisable to leave the protective
cap on the unit to keep the optics clean. Good system
performance requires clean port optics and cable ferrules
to avoid obstructing the optical path.
Clean compressed air often is sufficient to remove parti-
cles of dirt; methanol on a cotton swab also works well.
x
One HFBR-1414TZ transmitter
x
One HFBR-2416TZ receiver
x
Three meters of ST connectored 62.5/125 μm fiber
x
x
x
x
x
x
optic cable
Printed circuit board
ML-4622 CP Data Quantizer
74ACTllOOON LED Driver
LT1016CN8 Comparator
4.7 μH Inductor
Related literature
Recommended Chemicals for Cleaning/Degreasing
HFBR-0400Z Products
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane, Other: soap solution, naph-
tha.
Do not use partially halogenated hydrocarbons such
as 1,1.1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride, phenol,
methylene chloride, or N-methylpyrolldone. Also, Avago
Technologies does not recommend the use of cleaners
that use halogenated hydrocarbons because of their
potential environmental harm.
HFBR-0400Z SMA Evaluation Kit
Contains the following:
x
One HFBR-1402Z transmitter
x
One HFBR-2402Z five megabaud TTL receiver
x
Two meters of SMA connectored 1000 μm plastic opti-
cal fiber
x
Related literature
HFBR-0416Z Evaluation Kit
Contains the following:
x
One fully assembled 1x9 transceiver board for 155
MBd evaluation including:
- HFBR-1414Z transmitter
- HFBR-2416Z receiver
- circuitry
x
Related literature
Ultem® is a registered Trademark of the GE corporation.
4
AVAGO [ AVAGO TECHNOLOGIES LIMITED ]
