COTS PEM
BOOT SECTOR FLASH
Austin Semiconductor, Inc.
AS29LV016J
ABSOLUTE MAXIMUM RATINGS
Storage Temperature Plastic Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . –65°C to +125°C
Voltage with Respect to Ground
1
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V
A9, OE#, and RESET#2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins1 . . . . . . . .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to VCC+0.5 V
Output Short Circuit Current3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 mA
Notes:
1.Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot
VSS to –2.0 V for periods of up to 20 ns. See Figure 7 below. Maximum DC voltage on input or I/O pins is
VCC +0.5 V. During voltage transitions, input or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns.
See Figure 8 below.
2.Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and
RESET# may overshoot VSS to –2.0 V for periods of up to 20 ns. See Figure 7 below. Maximum DC input
voltage on pin A9 is +12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
3.No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater
than one second.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This
is a stress rating only; functional operation of the device at these or any other conditions above those indicated in
the operational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating
conditions for extended periods may affect device reliability.
OPERATING RANGES
Enhanced (/ET) Devices
Ambient Temperature (TA). . . . . . . . . . . . . . . . . . . . . . . . .. .-40°C to +105°C
Extended (/XT) Devices
Ambient Temperature (TA). . . . . . . . . . . . . . . . . . . . .. . . . . .-55°C to +125°C
VCC Supply Voltages
VCC for standard voltage range. . . . . . . . . . . . . . . . . . . . . . . . 3.0V to 3.6V (-55°C to 125°C)
2.7V to 3.6V (-40°C to 125°C)
Operating ranges define those limits between which the functionality of the device is guaranteed.
20 ns
20 ns
20 ns
VCC
+0.8 V
+2.0 V
VCC
+0.5 V
–0.5 V
–2.0 V
2.0 V
20 ns
20 ns
Figure 8. Maximum Positive
Overshoot Waveform
Figure 7. Maximum Negative
Overshoot Waveform
Austin Semiconductor, Inc. reserves the right to change products or specifications without notice.
AS29LV016J
Rev. 0.0 02/09
26
AUSTIN [ AUSTIN SEMICONDUCTOR ]
