EEPROM
AS28C010
Austin Semiconductor, Inc.
ABSOLUTE MAXIMUM RATINGS*
*Stresses greater than those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the
operation section of this specification is not implied. Exposure
to absolute maximum rating conditions for extended periods
may affect reliability.
Voltage on Vcc Supply Relative to Vss................-0.5V to +7.0V1
Voltage on any pin Relative to Vss.......................-0.6V to +7.0V1
StorageTemperature ............................................-65°C to +150°C
Operating Temperature Range.............................-55oC to +125oC
Soldering Temperature Range...............................................260oC
Maximum Junction Temperature**....................................+150°C
Power Dissipation...................................................................1.0W
** Junction temperature depends upon package type, cycle
time, loading, ambient temperature and airflow.
ELECTRICAL CHARACTERISTICS AND RECOMMENDED DC OPERATING CONDITIONS
(-55oC < TA < 125oC; Vcc = 5V +10%)
PARAMETER
CONDITION
SYMBOL
VIH
MIN
2.0
MAX
UNITS
Input High (Logic 1) Voltage1
Input Low (Logic 0) Voltage1
Input Leakage Current
Output Leakage Current
Output High Voltage
VCC + 1.0V
V
V
VIL
-1.0
0.8
10
10
VIN = VSS to VCC
ILI
P$
P$
V
V
OUT =VSS to Vcc, CE\=VIH
ILO
IOH = -400 PA
IOL = 2.1 mA
VOH
VOL
2.4
Output Low Voltage
0.4
V
Notes: 1) VIL min. and VIH max. are for reference only and are not tested.
MAX
PARAMETER
CONDITIONS
SYM
-12
-15
-20
-25 UNITS NOTES
Power Supply Current:
Operating
I
OUT=OmA, Vcc = 5.5V
100
100
500
3
80
80
500
3
mA
ICC3
Cycle=MIN
CE\=Vcc, Vcc = 5.5V
ICC1
500
3
500
3
PA
Power Supply Current:
Standby
CE\=VIH, Vcc = 5.5V
ICC2
mA
Austin Semiconductor, Inc. reserves the right to change products or specifications without notice.
AS28C010
Rev. 1.5 5/06
4