欢迎访问ic37.com |
会员登录 免费注册
发布采购

ATMEGA16L-8PC 参数 Datasheet PDF下载

ATMEGA16L-8PC图片预览
型号: ATMEGA16L-8PC
PDF下载: 下载PDF文件 查看货源
内容描述: 8位AVR微控制器具有16K字节的系统内可编程闪存 [8-bit AVR Microcontroller with 16K Bytes In-System Programmable Flash]
分类和应用: 闪存微控制器和处理器外围集成电路光电二极管异步传输模式ATM时钟
文件页数/大小: 315 页 / 2880 K
品牌: ATMEL [ ATMEL CORPORATION ]
 浏览型号ATMEGA16L-8PC的Datasheet PDF文件第4页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第5页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第6页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第7页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第9页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第10页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第11页浏览型号ATMEGA16L-8PC的Datasheet PDF文件第12页  
• Bit 7 – I: Global Interrupt Enable
The Global Interrupt Enable bit must be set for the interrupts to be enabled. The individ-
ual interrupt enable control is then performed in separate control registers. If the Global
Interrupt Enable Register is cleared, none of the interrupts are enabled independent of
the individual interrupt enable settings. The I-bit is cleared by hardware after an interrupt
has occurred, and is set by the RETI instruction to enable subsequent interrupts. The I-
bit can also be set and cleared by the application with the SEI and CLI instructions, as
described in the instruction set reference.
• Bit 6 – T: Bit Copy Storage
The Bit Copy instructions BLD (Bit LoaD) and BST (Bit STore) use the T-bit as source or
destination for the operated bit. A bit from a register in the Register file can be copied
into T by the BST instruction, and a bit in T can be copied into a bit in a register in the
Register file by the BLD instruction.
• Bit 5 – H: Half Carry Flag
The Half Carry Flag H indicates a half carry in some arithmetic operations. Half Carry is
useful in BCD arithmetic. See the “Instruction Set Description” for detailed information.
• Bit 4 – S: Sign Bit, S = N
V
The S-bit is always an exclusive or between the negative flag N and the two’s comple-
ment overflow flag V. See the “Instruction Set Description” for detailed information.
• Bit 3 – V: Two’s Complement Overflow Flag
The Two’s Complement Overflow Flag V supports two’s complement arithmetics. See
the “Instruction Set Description” for detailed information.
• Bit 2 – N: Negative Flag
The Negative Flag N indicates a negative result in an arithmetic or logic operation. See
the “Instruction Set Description” for detailed information.
• Bit 1 – Z: Zero Flag
The Zero Flag Z indicates a zero result in an arithmetic or logic operation. See the
“Instruction Set Description” for detailed information.
• Bit 0 – C: Carry Flag
The Carry Flag C indicates a carry in an arithmetic or logic operation. See the “Instruc-
tion Set Description” for detailed information.
General Purpose
Register File
The Register File is optimized for the AVR Enhanced RISC instruction set. In order to
achieve the required performance and flexibility, the following input/output schemes are
supported by the Register file:
One 8-bit output operand and one 8-bit result input
Two 8-bit output operands and one 8-bit result input
Two 8-bit output operands and one 16-bit result input
One 16-bit output operand and one 16-bit result input
Figure 4 shows the structure of the 32 general purpose working registers in the CPU.
8
ATmega16(L)
2466E–AVR–10/02